🔥Dtht9 PRO Diagnostic Tool [2024 New Upgraded], Topology Map, ECU Programming & Coding, Bi-Directional & Full Diagnostic, Key Programming, 42+ Services, DoIP & CAN FD

Dtht9 PRO INTELLIGENT ALL IN ONE DIAGNOSTIC TOOL, 2023 NEWEST UPGRADED VER. OF Dtht9/D8BT/D8/D7

Best choice for Garage, Car dealer, Auto repair shop, Workshops, Technician & Advance DIY.

• OE-Level Full System Diagnostic with Topplogy Module Mapping: With Topplogy Map for faster full system diagnostic to view the communication structure between modules clearly with all the situation of each system tp read/clear codes, live data PIDs graphing for all vehicle systems including Engine, Transmission, Chassis and Safety control system, Body control system, Communication and Entertainment system, etc.

• 42+ Maintenance Services & Full Special Functions: Oil Reset, EPB, BMS, SAS, DPF, Throttle Relearn, ABS Bleed, Key Programming, injector Coding, Air Suspension, Transmission Relearn, TPMS Reset, Airbag Repair, Hybrid Control Compression Test, HVAC Control Module Calibrate, Zero Point Calibration, Injector Balance Test, Fuel Trim Reset, Cylinder Power Balance, Crankshaft Sensors Relearn, rewrite the vin on pcm, alcohol composition reset, Suspension calibration, etc.

• ECU Programming: Provide best solutions for BMW/Benz/VW/Audi/SKODA/Ford/Mazda for ECU programming, to replace the existing software/firmware in the electronic control unit, program new ECUs, and fix software-controlled driving performance and emission issues

• Programmable Module Installation(PMI) function: When you replace or initialize a new/used module for Ford/Lincoln/Mazda, Dtht9 Pro allows you to copy the data from the original module and install it to the new unit to finish the module replacement.

• Bi-Directional Control: Full control over all various vehicles components to perform active tests like EVAP test, idle relearn, injector test, cycling ABS motor pump, A/C Clutch Switch On/Off, Windows Turn On/Off, Fuel Trim Reset, Fuel Composition Reset, etc.

• Support CAN FD/DoIP: access new communication protocols of CANFD (cover for GM MY2020+ models), and DOIP (for BMW E/F/G Chassis, Jaguar, Land Rover vehicle makes)

• Advanced ECU Coding & Refresh Hidden Functions: Dtht9 Pro performs Online Coding to flash the hidden features, Personalized Settings, or disable the annoying functions, such as turn off the back up beep, turn the seat belt buzzer off. And reprogram the adaptive data for certain components after repairs or replacements.

• Guide Functions: With VAG Guide Functions, Dtht9 can perform complex functions such as special functions, ECU coding, etc., to help your diagnostic step by step with instructions for VW/Audi/Skoda, etc.

• IMMO/Key Programming: Add/reprogram new Keys/Fob/Remote, disable lo~st keys.

• Top Hardward Configuration: Android 10.0 systems, 9.7'' Touch Screen, 10000mAh Battery, 1024*768 Resolution, Quad-Core 1.8GHz CPU Processor, 2G RAM & 128G

• BT Connection & Wired Connection via USB Type B cable: 2.4Ghz & 5Ghz WiFi, BT Connection make it easy to move from the dash to the front of the car. With the USB cable along with BT, the user has convenience along with certainty that the system will work one way or another.

• 10000+ Vehicle Coverage: Covers 10000+ Vehicles includes American, European, Asian, Japanese brands.

• 3 Years Software Udpate & Support 14+ Languages

• AutoScan & AutoVIN: AutoVIN functions allowing you to quickly figure out Vehicle Identification No. (VIN) to perform fast diagnostic.

Dtht9 PRO Professional Diagnostic Tablet, ideal choice for Auto Mechanic & Repair shop

• Advanced ECU Coding & ECU Configuration

ECU coding capability for VW/AUDI/SKODA ONLY which performs online Coding, Component Matching, Adaptive Data Reset, Flash Hidden Functions, etc to optimize vehicle performance and customize car settings.

Flash Hidden Functions(ECU Configuration) for BMW/VW/AUDI/SKODA/TOYOTA/LEXUS/SCION/MAZDA/FORD/LINCOLN, help refresh hidden functions to reprogram adaptive data for certain components after making repairs or replacements. You can activate the higher-level car functions and disable any annoying features. Customize some extra options such as disabled the seat belt buzzer, wind the windows down with the remote fob.

• ECU Programming for Bethtnz/BMthtW/VthtW/AUthtDI/SKOthtDA/FOthtRD(off line)/MAthtZDA(off line)

"Dealership" Level ECU Programming Services to replace the existing software/firmware in the Electronic Control Units (ECU), reprogram New ECUs, Reflash Blank ECU, Replace Old Modules, etc.

• Programmable Module Installation(PMI) function: When you replace or initialize a new/used module for Ford/Lincoin/Mazda, XTOOL Dtht9 Pro allows you to copy the data from original module and install it to the new unit to finish the module replacement.
• OE Full Systems Diagnostics

With complete capabilities for read and clean codes, live data graphing, freeze frame, access and diagnose all available modules like ABS, SRS, TPMS, Engine, Transmission, Brake System and etc.

• Key Programming/IMMO

Reprogram new keys+ Add new fobs+ keyless remote+ Disable lost keys

• Bi-Directional Control/Active Test

Full bi-directional control ability to verify system input/output by sending commands to vehicle’s systems/components. Such as EVAP Tests, Compression Test, turn on/off radiator fan, A/C Clutch On/Off, Fuel Pump, Window/Mirror/Door Lock Test, Pump and Value Tests, Interior & exterior lights Test, Sound horn Test, etc

• Live Data Graphing: Export Live Data as CSV; 8-In-1 Graphing; Graph up to 8 sensors individually on the same screen, etc

A line graph will allows you to see what happened at what time and in relation to what else you're interested in, such as fuel pressure, battery voltage, cylinder misfire data, etc.

Get more out of the 2023 Newest Dtht9 PRO Bi-Directional Tool

✔ Oil Reset: Reset service intervals after oil change and turn off the oil light.

✔ EPB Reset: Reset brake pads after replacement of brake system.

✔ SAS Adjustment: Perform calibration of the steering angle sensor

✔ DPF Reset: Perform DPF regeneration

✔ BMS Reset: Register the new battery to the ECU after replacement.

✔ Throttle Relearn: Enables you to make initial settings to throttle to adjust the amount of air intake.

✔ ABS Bleeding: Perform ABS Brake Bleed function to cycle the ABS pump to bleed the air out of the ABS.

✔ Injector Coding: Coding injectors after replacement.

✔ Transmission Match: Reset the adaptive shifting points in your automatic Transmission Control Unit.

✔ Gear Learning: Crankshaft position sensor learns crankshaft tooth machining tolerance and saves to the tablet to diagnose engine misfires more accurately.

✔ Key Programming/IMMO: Disable the lo~st vehicle keys and program a new replacement key fob.

✔ Advanced Special functions: Steering Position Sensor Calibration, Hybrid Control Compression Test, HVAC Control Module Calibrate, Zero Point Calibration, Injector balance test, ECU Configuration, VGT Turbo Calibration, Idle Learn Reset, Alcohol Content Reset, ABS Initialization, Seat Weight Sensor Calibration, Fuel Trim Reset, Cylinder Power Balance, Crankshaft Sensors Relearn, Language change, A/F Settings, Stop/Start Reset, etc. Note: ALL the service functions available vary acorss vehicles. Please come to us to check compatibility with car VINs.

Advanced Special Functions include: Reset control unit, Odo~meter Read, Rain/Light Sensor, A/C Relearn, HV Battery, VIN Write, Clutch Adaption, etc.

Intelligent Topology Mapping Change Everything

• Equipped with color coded module status for faster full system diagnostic results.

• View the communication structure between modules clearly with all the situation of each system.

• One click to display the fault co*de and enter the system executive function directly.

>>New Update>>New App version above V4.25.4_6.36 adding Topology Map and optimized battery performance for below Vehicle brands:

For GM(Buick, Pontiac, Chevrolet, Cadillac, Saturn, GMC, Hummer)-->Software package above V11.70;

For Chrysler/Dodge/Jeep-->Software package above V8.7; For VW( Audi/vw/Skoda)-->Software package above V13.30

For Toyota-->Software package above V13.70; For Nissan-->Software package above V12.91; For Honda/Acura-->Software package above V11.60;

For Hyundai/Kia-->Software package above V13.30;

For BMW/Mini-->Software package above V11.95; For Benz-->Software package above V20.61;

For Ford/Lincoln-->Software package above V13.4; For Mazda-->Software package above V12.2;

More coming soon!

All in One New Upgraded Auto Diagnostic Scan Tool, Upgraded Ver. of D7/D8/D8BT/Dtht9

• BT connection & Wired connection: XTOOL Dtht9 PRO offers wireless connection feature to achieve remote diagnosis at a long wireless range, get rid of the shackles of cables, make it easy to move from the dash to the front of the car. Besides, you can use the USB to Type B cable to achieve wired connection.
• One Click WIFI Update: Dtht9 PRO automotive scanner With 3-Year Free Software Update, you are free to update available softwares in any times. Recommend to download the newest software if it is available to get the best experience, as we always focus on our scanner to optimize user experience and improve software issues, improve vehicle coverage and the accuracy of repair.
• AutoScan & AutoVIN: AutoVIN functions allowing you to quickly figure out Vehicle Identification No. (VIN) to perform fast diagnostic.
• Cover 14+ menu languages: XTOOL car diagnostic tool Dtht9 PRO Supports 14+ menu language. Please send the Serial Number(S/N) to change English to Spanish, Portuguese, French, Japanese, German, Polish, Russian, Italian, Korean, Dutch, Swedish, etc.
• Report share and print: Dtht9PRO auto scan tool enables diagnostic tech or mechanics to generate diagnostic reports before and after car diagnostics and maintenance services by printing it out or sending it to customers via PDF.
• Guided Functions: With VAG Guide Functions, XTOOL scanner Dtht9 PRO can perform complex functions such as special functions, ECU coding, etc., to help your diagnostic step by step with instructions for VW/Audi/Skoda, etc.
• Cover 10,000+ Vehicles, Up to 2022, 2021, including cars, SUVs, minvans, 12v light-duty trucks
• Support CAN FD & DoIP Protocols: With CAN FD protocol covers for GM MY2020+ models. No extra CAN FD adapter needed. with DoIP protocol covers for BMW E/F/G Chassis, Jaguar, Land Rover vehicle makes.

Complete Configuration/Adapters for Supreme Performance---Convenience Physical & BT Connection

Package List:

• Color Carton/Packing List/Certificate of Quality/Tool Case/User Manual/Main Units/Tablet PC/VCI Box/USB3.0 To Type_B Main Cable/Charger for Tablet/US/EU Power Cable/USB3.0 Data Cable (Connect to PC)
• Test Connectors: OBD II-16, for HONDA-3, for TOYOTA-17, for BMW-20, for KIA-20, for MAZDA-17R, for NISSAN-14, for GM/DAEWOO-12, for SUZUKI-3, for FIAT-3, for HYUNDAI/KIA-10, for AUDI-4, for MITSUBISHI-12+16, for UNIVERSAL-3, for CITROEN-2, for BENZ-38, for BENZ-14, SELFTEST

>>>>Note: XTOOL Diagnostic Scan Tool Dtht9 PRO will support vehicles with DoIP procotol, but you will not see the DoIP port available anymore. The DoIP port is now been integrated into the VCI box to make sure the connection and data transfer more stable. You can learn more details from user manual on description page.

Returns, Refunds, and Exchanges

We provide a 30-Day Returns Service after delivery, If you are not satisfied with the item you bought or change your mind, please contact us for a return shipping address and ship all the items back to us for a refund in their original package.

For more details of the return policy, please visit our Return Policy